BS EN 10208-2-2009 Steel pipes for Pipelines for Combustible Fluids
|
ID： |
51BE5F3AD7034FCCB0F3E48DD74011D8 |
|
文件大小(MB)： |
1.47 |
|
页数： |
58 |
|
文件格式： |
|
|
日期： |
2009-5-13 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BS EN,10208-2:2009,ICS 23.040.10,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BRITISH STANDARD,Steel pipes for,pipelines for,combustible fluids —,Technical delivery,conditions,Part 2: Pipes of requirement class B,This British Standard,was published under the,authority of the Standards,Policy and Strategy,Committee on 30 April,2009.,. BSI 2009,ISBN 978 0 580 63200 6,Amendments/corrigenda issued since publication,Date Comments,BS EN 10208-2:2009,National foreword,This British Standard is the UK implementation of .,It supersedes BS EN 10208-2:1997 which is withdrawn.,The UK participation in its preparation was entrusted to Technical,Committee PSE/17/2, Transmission pipelines.,A list of organizations represented on this committee can be obtained on,request to its secretary.,This publication does not purport to include all the necessary provisions,of a contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity,from legal obligations.,EN 10208-2:2009,BS EN 10208-2:2009,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10208-2,March 2009,ICS 23.040.10 Supersedes EN 10208-2:1996,English Version,Steel pipes for pipelines for combustible fluids - Technical,delivery conditions - Part 2: Pipes of requirement class B,Tubes en acier pour conduites de fluides combustibles -,Conditions techniques de livraison - Partie 2: Tubes de la,classe de préscription B,Stahlrohre für Rohrleitungen für brennbare Medien -,Technische Lieferbedingungen - Teil 2: Rohre der,Anforderungsklasse B,This European Standard was approved by CEN on 25 January 2009.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the CEN Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the,official versions.,CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: Avenue Marnix 17, B-1000 Brussels,. 2009 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10208-2:2009: E,BS EN 10208-2:2009,EN 10208-2:2009 (E),2,Contents Page,Foreword…………………………………………………………………………………………………………………..3,Introduction……………………………………………………………………………………………………………….4,1 Scope ..5,2 Normative references .5,3 Terms and definitions 7,4 Symbols and abbreviations 8,5 Classification and designation .8,5.1 Classification ..8,5.2 Designation .8,6 Information to be supplied by the purchaser .9,6.1 Mandatory information ..9,6.2 Options ..9,6.3 Example of ordering 11,7 Manufacturing 11,7.1 General 11,7.2 Steelmaking . 12,7.3 Pipe manufacture . 12,7.4 Heat treatment condition . 12,7.5 Sizing .. 13,7.6 Strip end welds . 14,7.7 Jointers .. 14,7.8 General requirements for non-destructive testing .. 14,8 Requirements . 14,8.1 General 14,8.2 Chemical composition .. 14,8.3 Mechanical properties 16,8.4 Weldability 21,8.5 Appearance and soundness .. 21,8.6 Dimensions, masses and tolerances 22,9 Inspection . 29,9.1 Types of inspection and inspection documents .. 29,9.2 Summary of inspection and testing .. 29,9.3 Selection and preparation of samples and test pieces. 30,9.4 Test methods .. 38,9.5 Retests, sorting and reprocessing . 42,10 Marking of the pipes 42,10.1 General marking 42,10.2 Special marking 43,11 Coating for temporary protection .. 43,Annex A (normative) Manufacturing procedure qualification .. 44,Annex B (normative) Treatment of imperfections and defects disclosed by visual,examination . 46,Annex C (normative) Non-destructive testing 47,Bibliography……………………………………………………………………………………………………………..54,BS EN 10208-2:2009,EN 10208-2:2009 (E),3,Foreword,This document (EN 10208-2:2009) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes,and fittings for steels tubes”, the secretariat of which is held by……
……